Thomson Micron? 行星減速機(不銹鋼減速機)適用于需要高扭矩體積比,高彎曲剛度及低齒隙的高精度運動控制應用。 我們提供的所有行星減速機(不銹鋼減速機)均具有自潤滑功能。對于任何給定尺寸,它都具有極高的徑向承載能力。這些行星減速機(不銹鋼減速機)產品可以將慣性與各種比例相匹配,從而幫助我們的客戶建造穩(wěn)定和受控的伺服系統(tǒng)。
產品介紹
視頻:Thomson離合器、電磁制動器和減速機技術
Thomson 電磁制動器/離合器產品線經理John Pieri介紹了摩擦式離合器和扭簧式離合器及其作為工業(yè)解決方案的各種應用。他還介紹了在某些特定場合下摩擦式離合器的使用方法和時間以及在其它場合下 扭簧式離合器的使用方法和時間。他還對減速機進行了介紹,并講解了減速機在應用設計方面的作用。
產品資料
AKM Gearmotors | 1517 KB | |
AquaTRUE? True Planetary Gearheads | 1225 KB | |
AquaTURE? 真正的行星減速機 | 763 KB | |
Micron MOTIONEERING® | 347 KB | |
Micron Guide Selection Guide | 257 KB | |
TRUE Planetary? 減速機 | 1505 KB | |
True Planetary? Gearheads | 1577 KB | |
True Planetary? Gearheads | 917 KB | |
XTRUE? True Planetary Gearheads | 1393 KB |
AKM Gearmotor Selection Guide | 6316 KB | |
True? Planetary Gearheads | 7421 KB | |
True Planetary? Gearheads | 7699 KB | |
True Planetary? Gearheads | 6956 KB | |
True Planetary? Gearheads | 12081 KB | |
True Planetary? Gearheads | 8034 KB |
Micron Redimount Table | 39 KB |
TRUE Planetary? Gearheads | 430 KB |
Technical Articles
Understanding, Selecting and Applying Planetary Gearheads | 2012-01-01 | |
Planetary Gearheads Key to Advances in Medical Applications | 2009-02-01 |
產品選型
Not finding the right gearhead for your needs? Visit Micron Motioneering, our full-featured sizing tool!
Family
Backlash
Peak Torque
Angle
Frame Size
Slim Line
Ratio
Gearing
Duty Cycle
Output Shaft: Single, Dual or Hollow
Redimount
Select other checkboxes to view available options
比較
3D 模型
Family
- ValueTRUE (VT) - Helical Crowned Gearing
- UltraTRUE (UT) - Helical Crowned Gearing
- XTRUE (XT) - Spur Gearing
- DuraTRUE (DT) - Spur Gearing
- EverTRUE (ET) - Continuous Duty, Spur Gearing
- AquaTRUE (AQT) - Stainless Steel Construction, IP66, IP67 and IP69K Protection. Perfect for washdown applications, Spur Gearing.
Frame Size
Roughly the width of the gear head.
Ratio
Input speed vs. output speed
Output Shaft: Single, Dual or Hollow
- Single - One solid output shaft
- Dual - Two solid output shafts. Only available on right angle units
- Hollow - Gearbox has a through bore for clamping onto a shaft. Only available on right angle units.
Angle
- Inline - Motor and output shaft will be in-line with each other
- Right Angle - Motor will be at a 90 degree angle from the output
Backlash
Backlash, sometimes called lash or play, is lost motion caused by space between the gear teeth.
Gearing
Helical gears are known for their quiet and smooth operation along with their ability to transmit higher loads than spur gears.
Peak Torque
Allowable momentary peak torque for emergency stop or heavy shock loading.
Duty Cycle
Continuous Duty - Able to run non-stop
Redimount
The RediMount is the adapter that goes between the Motor and the Gearhead. Different RediMount numbers have different dimensions. If you need assistance in selecting a RediMount to fit your motor contact customer support or visit Micromotioneering for assistance.
All Micron gearheads use the innovative RediMount? system, the most flexible mounting system available today. This mounting system allows easy and error free mounting to any motor on the market in just three easy steps - simply align, mount and tighten.
Slim Line
More compact version.